Skip to content
Buying guide · 5 min read

Tesla Model Y All-Weather Floor Mats: How to Fit, Flatten and Clean Them

Fitment options, flattening shipping creases, winter care and cleaning: a practical guide to getting the most from TPE all-weather mats in a Model Y.

We may earn a commission when you buy through links on this page. Learn more

Textured floor liner with brush and towel on garage floor
In this guide

All-weather floor mats are one of the first accessories many Model Y owners buy, and with good reason. The factory carpets show mud, snow and spilled coffee quickly. A well-fitted set of raised-edge liners keeps all of that off the carpet, and it is easy to clean. This guide covers choosing the right set, getting it to sit flat, and keeping it in good shape, using T-Launch's published product details as the example.

Step 1: Pick the right configuration

T-Launch's TPE all-weather set for the 2021–2024 Model Y is offered in three bundles:

  • Floor mats (3 pieces): driver, passenger and rear floor.
  • Frunk + trunk upper and lower (3 pieces): the storage areas only.
  • Full set (6 pieces): everything.

You also choose 5 seats or 7 seats, and the listing specifies left-hand drive. Getting these options right matters more than anything else, because a mat cut for the wrong layout will not sit correctly around the seat rails and pedals.

The model-year range matters too. The same collection lists separate items for 2020–2024 and 2021–2024 cars. If you have a newer refreshed Model Y, check the listing's fitment line carefully rather than assuming a mat fits.

TPE, XPE and double-layer: a quick glossary

  • TPE (thermoplastic elastomer) is flexible, rubbery and waterproof, the usual material for molded liners with raised edges.
  • XPE (cross-linked polyethylene foam) is lighter and softer. T-Launch lists XPE sets as well.
  • Double-layer mats combine a waterproof base with a removable top layer, such as flocking or a carpet-like blanket, for a softer feel.

T-Launch describes its TPE set as waterproof, snow proof, dustproof and liquid proof, made from environmentally friendly, non-toxic and odorless material.

Step 2: Flatten shipping creases

Molded mats are often folded or rolled for shipping and can arrive with creases or curled corners. T-Launch's product page gives a clear fix: let them relax in the sun, or use a hair dryer on gentle heat, any other source of warm air, or warm water. Once straight, they stay that way after cooling.

A practical method:

  1. Lay each mat flat on a clean surface in the sun for an hour or two.
  2. For stubborn creases, warm the area gently with a hair dryer, moving it constantly. Do not use a heat gun.
  3. Place something flat and heavy on the area as it cools.

Step 3: Install correctly

  • Vacuum the carpet first so grit does not sit under the liner.
  • Remove the old factory carpet mats; stacking mats can push into the pedals.
  • Fit the driver's mat first, sliding it under the front lip and checking that the accelerator and brake move freely with full travel.
  • Press the edges into the footwell so the raised lip sits against the sides.
  • For the 7-seat version, confirm the second-row piece clears the seat rails when the seats slide.

Routine cleaning

TPE is easy to clean, which is the main reason to buy it.

  • Weekly or as needed: take the mats out, shake them off, and wipe with a damp microfiber cloth.
  • Deeper clean: rinse with a hose, scrub the textured surface with a soft brush and mild soap, rinse again.
  • Dry completely before putting the mats back. Trapped water can sit under the edge and dampen the carpet.
  • Avoid tire shine or silicone sprays on the driver's mat. They make the surface slippery under your shoes.

For double-layer mats with a removable top, clean the top separately according to its material; flocked or carpet tops usually need vacuuming rather than hosing.

Winter care

Snow, slush and road salt are where all-weather liners earn their place. Salt water dries into a white crust that can be gritty underfoot.

  • Empty meltwater from the footwell liners often, especially the driver's side.
  • Rinse with warm water to dissolve salt residue, then dry.
  • Keep a small towel in the car to blot pooled water on long winter drives.

Frunk and trunk liners

The frunk and trunk upper and lower pieces protect against groceries, sports gear and wet bags. Pull them out and wipe them every few weeks. Do not overload them with sharp tools that can cut the surface.

Returns and checking on arrival

T-Launch's refund policy allows a return request within 30 days of receiving an item, provided it is unused and in its original packaging, with proof of purchase. You must contact support first; returns sent without a request are not accepted. It asks customers to inspect orders and report damage, defects or a wrong item within 7 days, with photos.

For change-of-mind returns, the customer pays return shipping and the cost is deducted from the refund; there is no restocking fee. So test-fit mats without fully installing them, check the 5 or 7-seat layout immediately, and keep the packaging until you are sure.

Frequently asked questions

Will these fit a 2025 Model Y?

Only buy what the listing's fitment line names. The set described here is listed for 2021–2024.

Why does the mat still curl after heating?

Give it more time flat under weight. Large mats sometimes need a warm afternoon or two.

Sources

Fitment, bundle options, materials and the crease tip come from T-Launch's TPE floor mat page and the Model Y floor mat collection. Return terms come from T-Launch's refund policy, checked in November 2026. Cleaning advice reflects common practice for rubber-type liners. This is a research-based guide; we have not tested these mats ourselves.