Skip to content
Buying guide · 6 min read

DST, DSB and PES Embroidery Files Explained: What a Poolin Machine Actually Reads

Poolin's home machines read DST and DSB files. Here is what those formats store, what they leave out, and how to avoid buying designs your machine cannot use.

We may earn a commission when you buy through links on this page. Learn more

A laptop with abstract stitch preview, USB stick and embroidery supplies
In this guide

The first time you buy an embroidery design online, the checkout page often offers a zip file with eight or nine versions of the same design: DST, PES, JEF, EXP, VP3 and more. Pick the wrong one and your machine either refuses the file or shows a design with odd colors. Poolin keeps this simple: its comparison page lists the supported formats for the EOC05, EOC06 and EOC07 as DST/DSB. This guide explains what those two letters mean in practice and how to work with them.

What an embroidery file really is

An embroidery machine file is not a picture. It is a list of instructions: move the needle to this coordinate, make a stitch, jump here without stitching, stop for a color change, trim. The machine follows those instructions in order. That is why you cannot simply rename a JPG or PNG to DST and expect it to sew. A design has to be digitized first, meaning someone (or some software) decides stitch types, density, direction, underlay and sequence.

Different machine makers created their own formats over the years. The geometry is broadly similar, but each format stores extra information differently, which is why design shops offer so many versions.

DST: the industry workhorse

DST is the Tajima format and probably the most widely supported file type in embroidery, from single-needle home machines to multi-head commercial ones. Its strength is simplicity. It stores stitches, jumps, trims and color stops, and almost every design marketplace offers it.

Its weakness is also simplicity: a DST file does not carry the actual thread colors. It knows there is a color change after stitch 1,240, but not that the next color should be red. When you open a DST file, the machine or software assigns placeholder colors. That is normal, not a sign that the file is broken.

What to do about it:

  • Keep the color chart or thread list that came with the design. Most sellers include a PDF or image.
  • Check the number of color stops on screen against the seller's chart before you start.
  • On a single-needle machine, you will rethread at every stop anyway, so follow the chart in order.

DSB: a close cousin

DSB is the Barudan format. Like DST it records stitch data and color stops rather than a full color palette. You will see it less often in marketplaces, but because the Poolin home machines list it as supported, a DSB file is a usable fallback when a DST version is missing.

What about PES, JEF, EXP and the others?

PES is associated with Brother machines, JEF with Janome, EXP with Melco and VP3 with Husqvarna Viking and Pfaff. Some of these formats store thread color information, which is why a PES file can look "right" on screen immediately. None of them are listed as supported on the Poolin comparison page for the EOC05, EOC06 or EOC07, so assume you need to choose DST (or DSB) when downloading.

If a design is only sold in a format your machine does not read, conversion software can usually export it as DST. Conversion keeps the stitches as they are; it does not re-digitize the design. A design built for a much smaller hoop will not improve by being converted, and resizing a stitch file by more than a small amount can make it too dense or too sparse.

Getting files onto a Poolin machine

Poolin lists both USB and Wi-Fi transfer for its EOC05, EOC06 and EOC07 home machines. The machines store up to 500 designs or 30 million stitches, according to the same comparison table. The multi-needle EOM uses USB and Wi-Fi through the Institch Cloud, and its product page also describes a "doodle digitizing" tool aimed at beginners.

A tidy workflow saves a lot of confusion later:

  1. Unzip the purchase on your computer and keep only the DST (and the color chart) in a project folder.
  2. Rename the file to something readable, such as bee-patch-90mm.dst, so you can find it on a small screen.
  3. Check the design size against your hoop before you transfer it. More on that below.
  4. Transfer by USB or Wi-Fi and confirm the stitch count and color stops on the machine.

Match the design size to the hoop before anything else

The most common reason a downloaded file "doesn't work" is size, not format. Poolin's published embroidery areas are:

  • EOC05: 100 × 235 mm (3.94 × 9.25 in), with 100 × 100 mm and 100 × 235 mm hoops
  • EOC06: 200 × 280 mm (7.87 × 11.2 in), with 140 × 140, 200 × 200 and 200 × 280 mm hoops
  • EOC07: 200 × 380 mm (7.9 × 15 in), with 140 × 140, 200 × 200 and 200 × 380 mm hoops
  • EOM (15-needle): up to 360 × 240 mm (14 × 9.5 in)

Design sellers usually list each size separately, for example "4 × 4", "5 × 7" and "6 × 10". Download the version that fits inside the hoop you will actually use, with a little margin around the edges.

Buying designs: a short checklist

  • Is a DST (or DSB) version included? If not, do you have software that can convert it?
  • Is there a color chart, since DST will not carry colors?
  • What is the finished size in millimeters, and does it fit your hoop?
  • What fabric was it digitized for? A dense design meant for denim can pucker on a thin T-shirt.
  • Does the license allow selling finished items, if you plan to?

Digitizing your own designs

Eventually many owners want to turn their own artwork into stitches. That is a skill rather than a file conversion. Poolin promotes an "Embroidery Legacy" digitizing course with step-by-step, project-based lessons, and the EOM page describes a doodle-style digitizing tool. Whatever software you use, export to DST for these machines and run a test stitch-out on scrap fabric with the same stabilizer before using the real garment.

Frequently asked questions

Why are the colors wrong when I open a DST file?

DST stores color stops, not colors. The display uses placeholders. Use the seller's color chart.

Can I use built-in designs instead?

Yes. Poolin lists 130 built-in designs on the EOC05 and 200 on the EOC06 and EOC07. They are a good way to practice hooping and thread changes before buying files.

Will a converted PES file sew exactly the same?

Usually the stitches are identical, but check the color sequence and trims, and always test first.

Sources

Supported formats, embroidery areas, hoop sizes, memory, transfer options and built-in designs come from Poolin's machine comparison page. EOM details come from the EOM product page, and the digitizing course from Poolin's digitizing page, all checked in November 2026. General format background reflects common industry usage. This is a research-based guide; we have not tested these machines ourselves.